Newsletter abonnieren und Preisvorteile sichern! Delete
Checkout
0
CHF 0.00
ESPCD9471-53933_Z1.jpg
ESPCD9470-Moto_Z2.jpg
ESPCD9470-Moto_Z3.jpg
ESPCD9470-Moto_Z4.jpg
ESPCD9470-Moto_Z5.jpg
ESPCD9470-Moto_Z6.jpg
Product no. ESPCD9471-53933
SP Connect Moto Bundle
iPhone 12 Pro /12
The SP Connect MOTO BUNDLE lets you mount your smartphone to your motorbike in seconds. Fasten the MOTO MOUNT PRO to the handlebars of your motorcycle and you are ready to mount the SP Connect PHONE CASE(or UNIVERSAL INTERFACE) by placing it on the mount and turning it 90° clockwise. To further protect your smartphone the mount also has a unique vibration dampening system that cuts G-forces by up to 40% (depending on bike & phone model). Your mobile phone is securely positioned right in the center of your vision, allowing you to navigate, access your playlists, read messages. Use the WEATHER COVER to protect your phone from rain and dirt as well as to provide additional shock resistance if necessary.
CHF 120.00
Recommended sales price incl. VAT
In stock
Your notes / frame no. + type approval number
Quantity
-
+
set
Fitting

iPhone 12 Pro /12

 

Fits standard and oversize handlebars

(Ø 2,22 / 2,54 / 2,86 / 3,17 cm or 0,875 / 1,0 / 1,125 / 1,25 inches)

Technical information
SPConnect_Manual_MotoMountPro.pdf
Download PDF
Product features
Position
Handlebar
Special Features
Super stable 360° adjustment in 6° steps.
Accessories
Phone Case, Weather Cover, Mounting Hardware
Finish / Color
Black

What if my phone model is not listed on the product page?

If you can’t find your phone in the variants shown, then we suggest that you choose the universal bundle which includes the Universal Interface. This way the patented SP Connect twist to lock mechanism can be used with almost any device either directly on your phone or on a case of your choice.

 

Does the Weather Cover make my phone waterproof?

The Weather Cover makes your phone weatherproof not waterproof. It will keep off rain, snow, sweat or mud but cannot protect it if your phone is submerged in water.

 

Will the Universal Interface (included in the Universal Bundles) stick to my device?

The 3M adhesive used on the Universal Interface will adhere to many non-porous flat surfaces such as plastic, glass, metal and painted surfaces. We have also achieved good results sticking it to silicone cases. You will need a surface of at least 2.16 x 2.56 inches (55 x 65mm) for the interface to be placed on. Make sure to clean the surface with an alcohol wipe before use. Stick on the interface to the surface by placing it on the surface and pressing down firmly for at least 30 seconds. The adhesive mount cannot be re-used, so make sure to position the adapter carefully.

 

What tools do I need to mount the Moto Mount Pro?

The tools needed are included. The mount can be mounted to any handlebar with the following diameters: 0,875 / 1,0 / 1,125 / 1,25 inches . To mount the clamp it is best to remove the arm first and position this afterwards. You can also mount the Moto Mount Pro without using the arm.

 

How does the vibration dampening work?

The head of the Moto Mount Pro has an integrated vibration dampening designed to reduce the vibrations by up to 40%. This can vary depending on the model of your motorcycle and the motor that is built into it.

Tell us your suggestions and experiences about this product!
Note: We reserve the right not to publish offensive or inappropriate comments and criticisms on our website and we thank you for your attention. Your contribution will only be published anonymously.
Clever to combine with