Akrapovic Slip-On exhaust system

/ Akrapovic / Akrapovic Car / Akrapovic Slip-On Systems / Toyota

Product no. UAKS-TY/T/2

Toyota Yaris GR 2021-23

This exhaust is produced using race-proven, high-grade titanium for the entire system and features megaphone-shaped tailpipes. A collector centred between the rear resonators has been cast in the in-house foundry; this collector optimizes and balances the gas flow to produce an acoustically tuned sound with no drone. Three resonators – two at the back of the collector and one in the middle pipe – further tune the sound experience to create a sporty racing tone, fully enhancing the engine’s characteristics with a deep and enthusiastic sound, to give the occupants a feeling of exhilaration that is never interrupted by excess noise. The engineers have placed a special emphasis on the acoustics in the middle and high rev range, with a high-frequency tone at higher rpms and more sound at idle and revving. This sound is managed by two megaphone-shaped titanium tailpipes that are welded to the exhaust and specially coated to resist any colour changes at high temperatures. The shape of the tailpipes influences the sound. They are bigger than stock, measuring in at 110 mm, and have a similar profile to the Akrapovič exhaust for the Toyota GR Supra. Developed to decrease back pressure, the system weighs in at 7,8 kg, which is 37 % lighter than stock and yields power gains of 9.5 kW (12.9 hp) at 6,950 rpm and torque increases of 13.0 Nm at 6,950 rpm when tested on the Akrapovič dyno against a Toyota GR Yaris with a standard stock exhaust. This exhaust is designed for use on racetracks and closed courses only. It is necessary to cut the stock exhaust system when installing this product, but no ECU remapping is needed for this configuration. An optional Evolution link pipe is available for customers looking to extend the exhaust tuning possibilities for even better performance of the Akrapovič Slip-On Race Line (Titanium) system.

CHF 3'398.00
Recommended sales price incl. VAT

Expected delivery date from manufacturer without guarantee: 05/13/2024

Please inform me when item is in stock

Your notes / frame no. + type approval number

This item needs homologation
Add homologation document to basket

Quantity

set

Specifications
Comments and questions (0)

Fitting

Toyota Yaris GR 2021-23

Technical information

Performance_UAKS-TYT2.pdf

Download PDF

Installation_UAKS-TYT2.pdf

Download PDF

Schematic_UAKS-TYT2.pdf

Download PDF

Product features

Torque

+13.0Nm / 6950rpm

Power

+9.5kW / 6950rpm

Homologation

Made in

Slovenia

Material

Titanium

Yet, there’s no comment or question about this product

Tell us your suggestions and experiences about this product!

support@parts-world.ch

Note: We reserve the right not to publish offensive or inappropriate comments and criticisms on our website and we thank you for your attention. Your contribution will only be published anonymously.

Clever to combine with

Akrapovic Link Pipe

Toyota Yaris GR 2021-23

CHF 539.00 / set

incl. V.A.T